Please Check our NEW WIKI, there may be more updated information regarding Bags!
What You Need:
Power Drill/Screwdriver
Jigsaw
2 Sheets of Plywood 24" x 36"
4 2x4's - 24" Long (frame)
4 2x4's - 32" Long (frame)
4 2x4's - 13.5" Long (legs)
Screws
Drawing Compas
Pencil
8 Bean Bags (4 of each color)
How To Build:
This is basically the same as building a Bags/Baggo/Cornhole game, just with different holes.
First make sure your wood is cut to the lengths mentioned above. Once all the wood is cut you can assembly the frame. Its pretty obvious how the fram goes together. Take 2 of the 24" Long pieces and position them on the shorter ends of the plywood, and the 32" Length ones in between those, running along the sides. Once they are lined up and everything looks good, use screws and screw the frame together. Do not screw the plywood into the frame until the frame itself has been assembled
As I mentioned, once the frame is assembled, screw the plywood top onto the frame you just created.
See Diagram Below on where to cut the holes.
The legs attach at the back, closest to the hole. You can cut them at a slight angle if you choose, its not necessary. Screw or bolt, through the frame into the legs, do not go through the platform.
Once you have the hole cut, you can sand and paint however you like.
Rules:
Baseball rules, and if you don't know the rules of baseball, I would assume you're not going to b be building this game.
Other Useful Links:
Pictures:
|
How To 
